Avid Technology XMON EUCON Guide de l'utilisateur télécharger pdf (Page 51)

Chapter 8: Setting the IP Address 47

Chapter 8: Setting the IP Address

Most Artist Control users will never have to set a static Internet Protocol (IP) address but in the rare cases that require it, use the

instructions in this section.

Normally Artist Control uses Dynamic Host Configuration Protocol (DHCP) to obtain its IP address, typically from a router.

Artist Control reverts to link-local addressing to generate an IP address if a DHCP server is not found on the network, such as

when an Artist Control is connected directly to a computer with an Ethernet cable. Both of these methods of obtaining IP ad-

dresses can be overridden by supplying a static IP address, which Artist Control uses in all cases when powered on.

To set a static IP address:

1 While holding down both <PAGE> keys simultaneously, press and release the POWER button. The Network Setup screen ap-

pears on the Touchscreen.

2 Touch the parameter labeled Use DHCP (Obtain IP Address automatically). This deselects the parameter and displays the IP Address

and Subnet Mask fields on the Touchscreen.

Attempt this only if you have prior experience configuring a network.

Network Setup Touchscreen with Use DHCP selected

1 2 ... 46 47 48 49 50 51 52 53 54 55

Pas de commentaire

Avid Technology XMON EUCON Guide de l'utilisateur Page 51